ECOVACS Goat G1 Manual De Instrucciones página 16

4. Clean the Blade Disc, Chassis, Off-road Wheels and Front Wheels
WARNING
ALWAYS wear protective gloves. DO NOT use the high pressure washer. High pressure water can enter the sealings and damage electronic
and mechanical parts.
• Power off GOAT.
• PUT ON THE PANORAMIC CAMERA COVER AND LAY SIGNAL RECEIVER DOWN.
• GENTLY TURN GOAT OVER ON A SOFT SURFACE.
• Clean the Blade Disc and the chassis with a brush.
• Check that the Blade Disc can rotate freely and Blades can spin freely.
• Clear the mud from the Off-road Wheels and Front Wheels by using a brush to have a ne grip.
EN 16