Urmet 1083 Manual De Configuración página 33

3. Scan the QR Code on the front of the device or in the
quick start guide if its location has been changed as
indicated in the booklet accompanying the product.
4. After scanning the QR Code, make sure the Wi-Fi
connected video doorbell is in the configuration
state; the LED on the bell button flashes blue and the
word Configuration is visible on display. If the Wi-Fi
connected video doorbell is not in the programming
state, press the reset and programming button 8
times. To access the button, the left locking screw
at the bottom must be removed.
5. On the smartphone, press "Continue".
6. Connect your smartphone to the video doorbell via
Wi-Fi. Bring the CallMe app into the background and
open the Wi-Fi settings page of your smartphone.
Access the Wi-Fi network call_CFW-xxxx.
Enter the requested password.
The password consists of the last 4 characters in
the WiFi name repeated twice but separated by the
character "-".Example "0821-0821".
DS1083-167A
7. When the smartphone is connected to the video
doorbell Wi-Fi network, reopen the CallMe app and
press the "Continue" button.
8. Assign a name to the video doorbell. This is the
name that will be displayed on the CallMe app
when a call is received. Then press the "Continue"
button.
33