Urmet 1083 Manual De Configuración página 44

— Press the "My devices" button to activate the call
forwarding service on the smartphones.
6.1. SIP ID
Press the "SIP ID" button. The following screen will
appear:
WARNING! If on the smartphone there is a version
of the CallMe App lower than 3.0, with an account
associated with a / 58 or / 58A device, after updating
the application it is necessary to enter the name and
surname to create a new account with the new one.
application version. Once the new account has been
created, the App will automatically associate the old
account with the new one in order to continue receiving
calls from the / 58 and / 58A devices.
If a version higher than 2.0 has been directly installed
on your smartphone, the app will automatically set the
automatic SIP ID.
By pressing the "Set Automatic SIP ID" button you
can enable calls to be received from the /58 and /58A
devices configured with version 3.0 of the CallMe App.
By pressing the "Set Existing SIP ID" button, you
can enable calls to be received from the /58 and /58A
devices, configured with version 2.0 or lower of the
CallMe App.
Enter the "Username" and "Password" of the old
account, then press the "Set SIP ID" button.
The "Current SIP ID" field will show the user name
used on the /58 or /58A device from which you will
receive the calls.
44
SIP ID
6.2. MY DEVICES
Press the "My devices" button. The following screen
will appear:
My devices
This screen shows the list of the installations in which
an association with the account in use was established.
IMPORTANT This
installations at which a device Ref. 1083/83 or a
video door phone 1760/31A - /32A - /33A or a video
door phone 1760/15 - /16 - /18 - /19 is present.
6.2.1. ACTIVATING THE CALL
FORWARDING SERVICE
The procedure for activating the call forwarding service
on the smartphone as a master account is described
below.
On the "My devices" page, press the "Add" button.
The QR code reader application on your smartphone
will start. If no applications are present, Apple Store
(iOS) or Play Store (Android) will open to download a
recommended app.
VIDEO DOOR PHONE 1760/31A -/32A -/33A
1. On the video door phone, press the
access the Top Page, then press the
to access the setting page.
2. Select the "Advanced Settings" parameter in the
video door phone setup menu.
3. On the video door phone, press on "Association
QR Code".
4. After a few seconds, the video door phone will
show a QR-Code on the display.
My devices
Add
screen shows only
DS1083-167A
the
button to
button