Spacer plates below
bed corrugation.
BASE RAIL
BED
CORRUGATION
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
6. Tighten the 5/8" hex nuts to 150 lbs.-ft.
7. Once the bed rails are square and the center bolt kit is properly installed you can start the
installation of the "HUSKY ROLLER".
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information /
Tech Support / Product Updates. 2020 Keystone Automotive Operations Inc. All Rights Reserved. 08/27/2020-Rev8
1 Spacer plate above bed corrugation &
1 spacer plate below bed corrugation.
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
Figure 2
BASE RAIL
BED
CORRUGATION
Page-5