Create Dryplus XL-Spiral Manual De Instrucciones página 11

C O NT I NU OU S WATE R DR AI NAG E
• The unit features a continuous drainage port. Using a plastic pipe (with an inner diameter
of 10 mm) insert it into the drain hole (on intermediate plate), reach out from the side of
the water tank, install it in place, and arrange the drain pipe.
• The water in the drainage tank can be continuously drained out from the continuous port
on the unit.
To clean the Body:
• Wipe it with a soft damp cloth.
To Clean the Air Filter:
1. Open the inlet grill firstly and remove the air filter.
2. Run a vacuum cleaner lightly over the surface of the air filter to remove dirt. If the air
filter is exceptionally dirty, wash it with warm water and a mild cleanser and dry thor-
oughly.
3. Insert the filter into the grill smoothly, and place the inlet grill into right place.
STO RI N G THE D E HUMIDI FI E R
When the unit is not being used for a long period of time and you want to store it note the
following steps:
1. Empty any water left in the drainage tank.
2. Fold up the power supply cord and put it in the water tank.
3. Clean the air filter
4. Store in a cool and dry place.
MAINTENANCE AND CLEANING
11
E NGLI SH