Create Dryplus XL-Spiral Manual De Instrucciones página 9

Idiomas disponibles

1. Power

2. Timer

3. Humidity settings

4. Mode settings

5. Fan speed

Humidity level and timer display

The indicator features 3 functions:

1. When the unit is plugged in, it will indicate the room humidity level for 3 seconds.

2. When you set the humidity, it will indicate the humidity that you have selected.

3. When you programme the time for the unit to turn on and off, it will show the time.

• When the environment humidity is lower than 35 %, the display will show 35.

• When the environment humidity is higher than 95 %, the display will show 95.

Automatic defrost function

• The defrost indicator will automatically turn orange when the defrost function is activat-

ed. After this function is finished, the indicator will turn off.

• The buzzer will alarm when the unit starts, the display will show the room humidity for 3

seconds, then the display will automatically switch off.

• Press the power button once to start operation. Press it again to stop it. The unit is set into

Dehumidifying mode

• Press the power button for 3-5 seconds and the Child-Protection Key Lamp will switch on.

All the other buttons will not work then. Press the power button for 3-5 seconds again and

then the child-protection key will switch off.

• Press the fan speed button to set it on high

on. Press the fan speed button for 3-5 seconds to set the sleep mode. The fan speed will

change to low. The display will show the sleep lamp

• The sleep function can only be set under the dehumidifying mode, the humidity can be set

between 55-60-65 %.

• The fan speed can be adjusted under the dry mode

than 55 %. The fan speed will be set in high speed. If the room humidity is under 50 %, the

fan speed is set low.

• Between 50-55 %, the fan speed will be adjusted into high / low automatically.

• Press the humidity settings button to adjust the humidity. The default humidity is set as 40 %

in the dehumidifying mode.

• Press the humidity settings button to adjust the humidity from 40 to 80 %, every setting is

5 %, the display will show the humidity setting when adjusting.

CONTROL PANEL

OPERATING INSTRUCTIONS

/ low

, and the fan speed lamp will turn

only after 10 seconds.

, when the room humidity is more

E NGLI SH