Publicidad
Idiomas disponibles
Idiomas disponibles
5. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
APPLIANCE PAIRING (ON APP)
Download the hOn App on your device by
framing the following QR code:
or by the link:
go.haier-europe.com/download-app
The App is available for devices
running both Android and iOS, both
for tablets and for smartphones.
Get
all
the
details
functions by browsing the App in
DEMO mode.
The frequency of the home Wi-Fi
network has to be set on the 2.4 GHz
band. You can not configure the
machine if your home network is set
to the 5 GHz band.
Open the App, create the user profile
(or log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display.
TO ENABLE REMOTE CONTROL
Check that the router is switched on and
connected to the Internet.
Load the laundry and close the door.
Turn the programme selector to the
REMOTE CONTROL (Wi-Fi) position
the controls on the control panel will be
disabled.
of
the
Wi-Fi
:
64
Start the cycle using the app. When the
cycle has been completed, turn off the
machine
by
turning
selector to the OFF position.
TO DISABLE REMOTE CONTROL
To exit REMOTE CONTROL mode while
a cycle is underway, turn the programme
selector to any position other than
REMOTE CONTROL (Wi-Fi), without
going through the OFF. The control
panel on the appliance will be operative
once again.
With the door closed, turn the programme
selector to the REMOTE CONTROL (Wi-
Fi) position to control the appliance using
the app once again. If there is a cycle
underway, it will continue.
With the door opened, the REMOTE
CONTROL will be disabled. To enable
it again, close the door, turn the
programme selector to any position
other than REMOTE CONTROL and
then select it again.
the
programme
Publicidad
