HP Color LaserJet Pro 3201 Serie Guía De Configuración página 4

3 Connect printer
EN On the control panel, choose your connection method: Ethernet, Wi-Fi, or USB.
FR Sur le panneau de commande, choisissez votre mode de connexion : Ethernet, Wi-Fi, ou USB.
ES Elija su método de conexión en el panel de control: Ethernet, Wi-Fi o USB.
1
2
Ethernet
EN
1. Connect an Ethernet cable from the printer to the same network as the computer.
2. Press "Continue" on the control panel to confirm the IP address. Continue with the steps on the
control panel until you reach the home screen. Then go to the next section of this guide.
Wi-Fi
1. Make sure the computer Wi-Fi is turned on and in range of the printer during setup.
2. On the control panel, enter Wi-Fi information when prompted. Choose the same network as the
computer.
3. Continue with the steps on the control panel until you reach the home screen. Then go to the
next section of this guide.
USB
1. Connect the USB cable to the port on the back of the printer and to the computer.
2. Continue with the steps on the control panel until you reach the home screen. Then follow the
instructions for Basic setup in the next section of this guide.
4
Connexion de
l'imprimante
Conecte la
impresora