After the coffe brewing, it has 3 beep sound.
y
The hotplate will keep the coffee warm and
y
will turn off automatically after 2 hours.
Recommend to enjoy your coffee fresh.
EN
The appliance can be turned off manually at
y
any time by pressing
button (T).
Note: Carafe can be taken out for coffee serving
during the brewing. However, carafe needs to be
placed back to the appliance not longer than 20
FR
seconds to avoid coffee overflow.
3. CloCK And TIMer FeATure
ES
seTTInG The CloCK
When the coffee maker is plugged in, the display
will show AM12:00 with the ":" flashing.
Set the clock by pressing either
button (R)
y
or
button (S) repeatedly until the desired
time is reached. Or hold the icons down to
scroll through the digits quickly.
(Fig.5)
seTTInG The TIMer
The appliance is equipped with a TIMER feature.
This allows you to start brewing coffee
automatically at the time you set.
Prepare the appliance as described in Section
y
2 'COFFEE PREPARATION' without pressing
button (T) for brewing.
Set the desired start time by pressing
y
button (Q), the clock will flash and the PROG
indicator (M) will turn white and flash. (Fig.6)
Set the hour by pressing
button (R) and
y
set the minute by pressing
button (S)
repeatedly. Or hold the icons down to scroll
through the digits quickly. (Fig.5)
After the timer is set, the display will show the
y
current time and the PROG indicator (M) will
turn white.
The appliance will automatically start to make
y
coffee at the time you have set. The PROG
indicator (M) will go off and the ON/OFF
indicator (N) will turn red.
After coffee brewing, it has 3 beep sound.
y
By pressing
button (Q), PROG indicator
y
light (M) will go off and the timer feature will
be deactivated.
If you want to change the timer feature, follow
y
the above steps by pressing the
(Q). The clock and the PROG indicator (M)
will flash. Then, you can start to set a new
brewing time.
Note: The programmed start time is saved until a
new start time is set or the appliance is being
removed or unplugged from the power source.
6
P22056-2-Wabilogic_AromaToccoPlusGlass_3L_220902.indd 6-7
4. MAKInG CoFFee oVer ICe
The appliance is equipped with ICE COFFEE
By pressing
button (P), the LED of ice
Fold over the seamed edges of a Melitta
®
1x4
basket. (Fig. 2)
Scoop the gr
(Recommend 1 scoop per cup.)
Fill the water tank with the desired amount of
level with
mark. (Fig.8)
Fill the glass carafe with ice up to the
suggested level with ICE mark. (Fig.8)
Note: Excessive ice will cause overflow.
Place the glass carafe into the appliance and
y
make sure drip stop is opened.
Select regular or bold flavored coffee result
y
by using
button (O). If bold flavored coffee
is selected, the white LED of coffee strength
indicator (K) is lit. By pressing
to select regular coffee and then the coffee
strength indicator will turn off. (Fig.3)
The appliance will start brewing after pressing
y
button (T).
After the coffee brewing, it has 3 beep sound.
y
Recommendation: Fill your cup with extra ice
cubes for colder coffee.
In ice coffee mode, the keep warming feature
y
is deactivated.
By pressing
button (P), the ice coffee
y
indicator (L) will go off and the ice coffee
feature will be deactivated and the keep
warming feature will be reactivated.
The appliance can be turned off manually at
y
any time by pressing
button (T).
button
5. CleAnInG And MAInTenAnCe
eXTernAl CleAnInG
Before cleaning always remove the plug from
y
the socket.
Never immerse appliance or cord in water.
y
®
The housing can be cleaned with a soft damp
y
cloth.
The glass carafe, lid and filter basket are
y
dishwasher safe.
When cold, the hotplate can be cleaned with
y
a soft damp cloth.
desCAlInG
The mineral content of the tap water in your area
and the frequency of use affect the rate of the
calcium buildup, which can affect the functioning
of your coffee maker and the flavor of your coffee.
For best performance from your coffee maker, we
recommend cleaning it periodically.
Follow the manufacturer instructions
y
regarding amounts and pour the descaling
agent into the water tank. We recommend
using Melitta
®
Anti Calc Filter Café Machines
button (O)
or half a tank of white vinegar and top it off
with clean water. Please do not exceed the
MAX level.
Press
button (T) and let the appliance
y
brew the descaling solution.
After descaling, press
y
off the appliance.
At the end of the descaling process, the
y
appliance should be rinsed through twice,
using the maximum amount of water without
coffee. This will remove any remaining
limescale deposits.
lIMITed WArrAnTy
In addition to the legal warranty claims, to which
the end user is entitled relative to the seller, for
the device, if it was purchased from a dealer
authorized by Wabilogic Inc. due to his consulting
competence, we grant a manufacturer's warranty
under the following conditions:
1 year limited warranty from the date of original
purchase.
1. This warranty extends only to the original
retail purchaser or gift recipient.
Keep the original sales receipt, as proof of
purchase is required to make a warranty
claim.
2. Defects that occur due to improper
connection, improper handling or repair
attempts by non-authorized persons are
not covered by the warranty. The same
applies for failure to comply with the use of
consumables (e.g. cleaning and descaling
agents) that do not correspond to the original
specifications. Wear parts (e.g. seals and
valves) and fragile parts are excluded from
the warranty.
3. This device was designed and built for
household use only. It is not suitable for other
button (T) to turn
uses.
4. Warranty does not cover damages that are
not the responsibility of the manufacturer.
This is valid especially for claims arising from
improper use (e.g. operation with insufficient
current or improper voltage).
EN
FR
ES
7
2/9/2022 4:49 PM