Arneg BADEN 90 SELF Manual De Instalacion Y Uso página 22

Baden
English
DO NOT use the cabinet barefoot
DO NOT touch the cabinet with wet or damp hands and feet.
DO NOT remove protective covers or panelling that require the use of tools to
remove them therefore DO NOT remove the electrical panel cover. These
operations must always be carried out by specialised technicians.
DO NOT obstruct the air inlet passages.
DO NOT use spotlights with incandescence lamps aimed directly on the
cabinet. Danger: overheating the merchandise.
Prevent solar irradiation from hitting directly on the goods displayed. Danger:
alteration of the goods.
Limit the temperature of the irradiating surfaces that are present in the sales
area, for example, by insulating the ceilings.
IN CASE OF A GAS LEAK OR FIRE OUTBREAK
Do not stay in the room where the cabinet is located if it is not
appropriately ventilated. Disconnect the cabinet by acting on the main
switch upstream of the device.
DO NOT USE WATER TO EXTINGUISH THE FLAMES, BUT DRY
EXTINGUISHERS ONLY.
ANY OTHER USE NOT EXPLICITLY POINTED OUT IN THIS MANUAL MUST BE
CONSIDERED DANGEROUS. THE MANUFACTURER CANNOT BE DEEMED
RESPONSIBLE FOR POSSIBLE DAMAGES STEMMING FROM AN IMPROPER,
INCORRECT, AND UNREASONABLE USE.
Useful numbers: Switchboard +39 0499699333 - Fax +39 9699444 - Call centre 848
800225
3. Purpose of the manual/Field of application - Subjects concerned
This instructions manual contains the description of the line of refrigerated
cabinetsBaden manufactured by ARNEG Spa.
The information that follow have the purpose of providing indications with regards to:
use of the cabinet
technical characteristics
installation and assembly
information for the personnel appointed to its use
maintenance interventions
safety indications
The manual must be considered a part of the cabinet and must be stored during
its entire lifetime.
The manufacturer deems itself absolved of any responsibility in the following
cases:
improper use of the cabinet
incorrect installation not performed in accordance to the norms indicated
defects in the electrical power supply
serious deficiencies in the foreseen maintenance
unauthorized modifications and interventions
use of non-original spare parts
partial or total inobservance of the instructions.
The manual must be stored by a person chosen for the purpose in a suitable place
known to all the operators and to the personnel appointed to maintenance, for it to be
consulted at any time.
In case of transfer to third parties, it must be handed over to the new user or owner,
providing due and prompt communication thereof to the supplier. In case of damage or
loss, request a copy from the supplier.
The present manual addresses the following subjects:
QUALIFIED OPERATOR: qualified person instructed to perform operation,
adjustment, cleaning, and maintenance of the cabinet.
22 05060141 00 05/03/2013