Canon ELPH LT Manual De Instrucciones página 41

Repeal steps 2 and 3 until all
digit settings and adjustments
are completed, then press the
Select button to end.
• The dale adjustmeni Is
complete when the digits
Slop blinking.
Press the DATE button to
display the Date 4^ Time
mode.
Repeat steps 2 and 3 until all
digit settings and adjusiments
are completed, then press the
Select button to end.
• The time adjustment is
coint^ete when theIn tne
lime display slops blinking.
m
vQ
(
ii£^
' C
«
• If".' Minks on the LCD panel (no Dale
Imprinting) when the battery Is replaced, reset the
dale and time.
0
* Press ttie Set button to advance the digit by one. or
hold for two seconds or more to advance the value
continuously.
• The date cannot be set or adjusted In Date
*
Time
mode.
• Alter removing the battery to replace it, do not touch
any of the switches on the camera. This allows the
date and lime settings to be retained lor
approximately five seconds.
11-41