Cherubini BLUE WAVE RX Serie Manual De Instrucciones página 24

NO NO
- The BLUE 35, BLUE 45 and BLUE 58 series of motors is designed only to automate the
movement of rolling shutters and sun awnings. Any other use is improper.
- Do not squash, crush, drop or wet the tubular motor with any kind of liquid; do not
pierce and do not apply any screw along the tubular section.
- The motor of series BLUE 35 must be installed in a tube with a minimum diameter of
40 mm.
- The motor of series BLUE 45 must be installed in a tube with a minimum diameter of
50 mm.
- The motor of series BLUE 58 must be installed in a tube with a minimum diameter of
70 mm.
- If the motor is used to move sun awnings, keep a safety horizontal distance of at least
40 cm between the fully opened awning and any permanent object.
- The choice of the motor, in its use application, must be compatible with the rating
marked on the motor itself.
- The tubular motor is designed to work non-stop for a maximum of 4 minutes.
- Only professional technicians must perform maintenance and repairs.
- Only professional technicians must perform installation, complying with all safety
instructions, especially those regarding electrical connections.
- The guarantee does not cover any damage caused by misuse, straining, tampering or
incorrect connections.
- If the cable is damaged please call the assistance centre or qualified technical
staff, in order to avoid any hazard.
SafeTy inSTrucTionS
NO
24
NO NO