Cherubini BLUE WAVE RX Serie Manual De Instrucciones página 42

command managemenT from whiTe wire
mode: up-STop-down-STop / up-down
nB: The default function provided in the motors leaving the factory is Up-STOp-DOwn-
STOp for singular Up/DOwn button switch.
It's always possible to change to the Up-DOwn, as described below:
pROCEDURE TO CHAnGE THE COnTROL mODE:
T1: Already programmed remote control
B + C
T1
Super-SenSiTiViTy oBSTacle deTecTion managemenT
where required - for example for window screens or screen fabric with a tensioner weight
attached - it is possible to activate/deactivate a high level of obstacle detection sensitivity
during downwards movement.
ACTIvATInG THE SUpER-SEnSITIvITy FUnCTIOn
Tn: Already programmed remote control
B + C
Tn
DEACTIvATInG THE SUpER-SEnSITIvITy FUnCTIOn
Tn: Already programmed remote control
B + C
Tn
during downwardS moVemenT
- only for Blue wave rX Ø 35 -
B
T1
A
Tn
A
Tn
42
C
Tn (2 sec)
B + C
Tn (2 sec)
A
+ B
Tn (2 sec)