Num'axes PIE 1013 Manual De Instrucciones página 35

•
: indicates the number of burst capture or video recording
time.
•
: indicates the battery status.
Full batteries
(icon on)
When batteries are low, the status display will show "LobAtt"
and the red indicator LED will light up. Please replace with new
batteries.
•
•
D: indicates the camera is in Date setting.
•
T: indicates the camera is in Time setting.
•
T-O: indicates the camera is in Time Out setting.
Time Out in PIR mode: length of time that the camera will
"wait" until it responds to any additional triggers from the PIR
after an animal is first detected and remains within the sensor's
range.
Time Out in Time Lapse mode: interval between two still images.
During Time Out (PIR or Time Lapse), the camera will not
capture photos/videos. This prevents the SD card from filling up
many redundant images.
•
PIR: indicates the camera is in PIR detection Mode (the camera
will take photos or videos when it is triggered by the PIR
sensor's detection of activity in the area it covers)
•
TLS: indicates the camera is in Time Lapse Mode (the camera
will take photos automatically at your choice of intervals during
one block of time you set up)
•
: indicates the GPS coordinate data: "+" for East longitude or
Indice A
Half charged
batteries
(icon blinking)
: indicates the still images resolution
Image resolution is 8MP
Image resolution is 5MP
Image resolution is 2MP
Weak batteries
(icon off)
35/144