Using The Camera In Time Lapse Mode; Viewing And Deleting Files - Num'axes PIE 1013 Manual De Instrucciones

program settings, and battery power level. The IR Emitter will
only be activated in low light conditions.

Using the camera in Time Lapse Mode

•
Mount the camera on a tree, wall or other sturdy object using
the supplied mounting strap.
•
Open the cover and slide the switch to the TEST position.
•
Press the [M] button once to enter the programming mode, the
word "PIR" or "TLS" will be blinking.
•
Press the UP [▲] button until you see the word "TLS" blinking
on the LCD screen.
•
Press the [M] button once to confirm and then press and hold
the [M] button for 2 seconds to exit.
•
For other settings, please follow the § "Camera setup and
program – Setting the Time Lapse Mode" above.
•
Then slide the switch from the TEST position to MAN, and close
the cover.
Now, the status display will count down 60 seconds for you to leave the
coverage area and then the camera will start capturing photos once
reached the programmed start time, and stop at the programmed end
time.

Viewing and deleting files

The camera offers the user different options for viewing their images.
You can view images or videos either on your computer using the
provided USB cable, or by taking out the SD card. The status display on
the front of the housing will show the number of images stored on the
SD memory card.
NOTE: The instructions below are based on starting with a
camera in the OFF position.
Viewing files on your computer via USB connection
Your camera is a plug and play USB storage device for users of Windows
Vista / Windows 7 / Windows 8 / MAC OS 10.6 and above operating
systems.
Indice A 50/144