Num'axes PIE 1013 Manual De Instrucciones página 39

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Press the UP [▲] or DOWN [▼] button to select PIR mode.
Press [M] to save your selection. The LCD screen indicates "PIR".
The words "CAM RES" or "VIDEO T" are blinking.
Press and hold the [M] button for 2 seconds to exit and come
back to the screen that indicates the status with the word "PIR".
Now, your camera will operate in PIR detection mode if you slide
the switch to the MAN position.
Setting the Image Resolution in PIR mode
Your camera can be programmed to 3 different image resolutions:
3 stars = 8MP / 2 stars = 5MP / 1 star = 2MP
Slide the switch to the TEST position from OFF, the status
display will show the camera current status.
Press the [M] button once to enter the programming mode.
The word "PIR" will be blinking, press [M] to confirm the
camera's operation is PIR detection.
Press the UP [▲] or DOWN [▼] button until the words "CAM"
and "RES" are blinking.
Press the [M] button once to enter the resolution setting.
Press the UP [▲] or DOWN [▼] button to select the desired
resolution.
Press [M] once to save your selection. The words "CAM" and
"burSt" (Burst shoot) will be blinking. Press the [M] button once
to enter the burst shoot setting or press and hold the [M]
button for 2 seconds to exit.
Setting the Burst Shoot in PIR mode
Your camera can be programmed to shoot 1 to 10 pictures per trigger.
Slide the switch to the TEST position from OFF, the status
display will show the camera current status.
Press the [M] button once to enter the programming mode.
The word "PIR" will be blinking, press [M] to confirm the
camera's operation is PIR detection.
Indice A
39/144

Publicidad

Tabla de contenido
loading

Tabla de contenido