Publicidad
Idiomas disponibles
Idiomas disponibles
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit www.3m.com/userinstructions or
contact 3M Technical Services for updated instruction manuals.
PRODUCT OVERVIEW:
Figure 1 illustrates available product models. Davit systems consist of two components: a base and a davit or jib boom. The
base secures the davit system to the ground and the davit (or jib boom) is secured to the base while acting as an adjustable,
movable anchorage point for the user. Davit systems may be used in a variety of Fall Protection applications, including Fall
Arrest, Restraint, Rescue, and Work Positioning applications.
Figure 2 identifies key components of the available product models. The Davit Arm, in addition to its composite structure, is
comprised of the Upper Bracket (A) and Lower Bracket (B), which secure a lifeline routed through the Davit Pulleys: the Lower
Davit Pulley (C), the Upper Davit Pulley (D), and the Rear Davit Pulley (E). The Winch Bracket (F) secures a winch to the back of
the Davit Arm.
The Davit Mast is comprised of one or two Mast Extensions (G). It is secured in place between the Davit Arm and the Davit Base.
The Davit Base is comprised of the Base Center Section (H), the Leg Sleeves (I), and the Leg Tubes (J). The Adjustable Feet (K)
provide height adjustment for the Variable Davit System and keep the system upright. The Tri-Screws (L) and Locking Pins (M)
allow for adjustment of the width of the system. The Level Indicator (N) helps the user ensure that the system is properly level.
See Table 1 for more information on Component Specifications.
G
N
H
Figure 2 - Components
B
F
M
L
A
D
C
J
I
3
E
A
C
B
K
Publicidad
