Publicidad
Idiomas disponibles
Idiomas disponibles
;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
System Specifications:
Capacity:
One person with a combined weight (including clothing, tools, etc.) of no more than 310 lb. (141 kg).
Anchorage:
The anchorage structure must be capable of supporting vertical loads up to 5,000 lb. (22.2 kN).
Service
-40°F to 130°F (-40°C to 54.4°C)
Temperature:
Standards:
Each product model is certified to, or conforms with, the applicable standards and regulations listed
within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.
Component Specifications:
Figure 2
Component
Reference
A
Upper Ring
B
Lower Ring
C
Lower Davit Pulley
D
Upper Davit Pulley
E
Rear Davit Pulley
F
Winch Bracket
G
Mast Extension
H
Base Center Section
I
Leg Sleeve
J
Leg Tube
K
Adjustable Feet
L
Tri-Screw
M
Locking Pin
N
Level Indicator
Performance Specifications:
Average
All connecting subsystems (SRDs, Energy-Absorbing Lanyards, etc.) used with the Davit System must
Arresting Force:
limit the Average Arresting Force to 900 lbf (4 kN).
Maximum
The Maximum Deflection of the system during a fall arrest is measured to be 0.0 in. (0 mm). This value
Deflection:
should be added to any calculated Fall Clearance requirements for your connecting subsystem.
Table 1 – Product Specifications
Materials
304 Stainless Steel
304 Stainless Steel
Plastic
Plastic
Plastic
Zinc-Plated Steel
Aluminum with Steel Coupler
Aluminum
Aluminum
Aluminum
Zinc-Plated Steel
Zinc-Plated Steel
Zinc-Plated Steel
Plastic
4
Publicidad
