Publicidad
Idiomas disponibles
Idiomas disponibles
2. Safety
2. Safety
2.1 Intended use
The model CTP1500 digital thermometer is used for temperature measurement in
liquids (water, oil, etc.), in air and in semi-solid materials.
Temperatures from -50 ... +250 °C [-58 ... +482 °F] can be measured.
The ambient temperature for the CTP1500 is 0 ... 50 °C [32 ... 122 °F] and should not be
exceeded.
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications in these operating instructions must be observed, see
chapter 9 "Specifications". It is assumed that the instrument is handled properly and
within its technical specifications. Otherwise, the instrument must be taken out of
service immediately and inspected by an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Connectors and female
connectors must be protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
2.2 Improper use
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media at the digital thermometer can result in a risk to
personnel, the environment and equipment.
▶
Wear the requisite protective equipment, see chapter 2.4 "Personal
protective equipment".
▶
For cleaning the instrument, see chapter 7.3 "Cleaning".
Any use beyond or different to the intended use is considered as improper use.
■
Unauthorised modifications to the instrument are not permissible.
■
Do not use the instrument with abrasive or viscous media.
■
Avoid any external forces such as impacts or pressure.
■
WIKA operating instructions, model CTP1500
EN
7
Publicidad
