8. CLOCK FUNCTIONS
8.1 End of cooking
To set the switch-off time for heating
functions.
1. Set the heating function and the
temperature.
2. Turn the knob for the timer to its full
range.
3. Turn the knob for the timer to set the
switch-off time.
When the set time ends, the signal sounds
and the appliance turns off.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Inserting accessories
Wire shelf
10. HINTS AND TIPS
10.1 Cooking recommendations
The temperature and cooking times in the
tables are for guidance only. They depend on
the recipes, quality and quantity of the
ingredients used.
Your appliance may bake or roast differently
than your previous appliance. The hints
below show recommended settings for
temperature, cooking time and shelf position
for specific types of the food.
10
ENGLISH
4. Turn the knob for the heating functions
and the knob for the temperature to the
off position.
To set a heating function without a set
cooking time, turn the knob for the timer
to the initial position
Insert the shelf between the guide bars of the
shelf support and make sure that the feet
point down.
Deep pan
Push the tray between the guide bars of the
shelf support.
If you cannot find the settings for a specific
recipe, look for a similar one.
Symbols used in the tables:
Food type
Heating function
Temperature
Accessory
.