Ultimaker Factor 4 Manual De Instrucciones página 2

Quick start guide
Take 3D printing to the next level
with the UltiMaker Factor 4 –
the reliable manufacturing solution
with fast ROI.
The UltiMaker Factor 4 is an industrial-grade
printer with high productivity and repeatable,
accurate printed parts. The integrated air
management and material handling solutions
ensure the lowest operation time and the
greatest peace of mind.
This quick start guide will help you set up your UltiMaker Factor 4 for first use.
Please retain all packaging materials for warranty purposes.
Safety messages
This quick start guide contains tips, notes, and warnings:
Provides additional information that is helpful to do a task or learn more.
Warns of a situation that may cause material damage or injuries if one does not follow the
safety instructions.
User manual
Before using this product, read the user manual to learn about all its features and safety-
related information. You can find the full UltiMaker Factor 4 user manual, available in English
and other languages, on our website: ultimaker.com/factor4-manual.
Support
For additional information and troubleshooting help, visit support.ultimaker.com.
Submit a support request via the support site or reach out to your local reseller.
When contacting support, keep your printer's serial number ready.
UltiMaker Factor 4 Quick start guide
Included accessories
• Print core AA 0.4
• Print core BB 0.4
• Flexible build plate
• Purge bucket (2x)
• Power cable
• Wire cutters
• XY calibration guide
• Tough PLA Black 750 g
Software and accounts
Use UltiMaker's software and cloud solutions in combination with your UltiMaker Factor 4 for an
integrated digital workflow.
• UltiMaker Cura – Prepare your models in UltiMaker Cura, our easy-to-use 3D printing
software. Download UltiMaker Cura for free from ultimaker.com/cura.
• Digital Factory – Via a set of cloud-based tools, you can manage your printers, print jobs,
and projects. Set up your workspace at digitalfactory.ultimaker.com.
Unboxing
It is recommended to remove the packaging materials with the box placed on the floor.
1. Cut and remove 2. Remove the
the Nylon straps locking clips from
from around the the top and lift off
box. the cap.
The printer must stay on the pallet until the installation. The pallet includes guidance blocks
to slide the printer onto the installation surface.
Location
Before proceeding with the installation, choose a suitable location for the UltiMaker Factor 4. Take
the following into consideration:
• The surface must be flat, level, stable, and capable of carrying the printer's weight
(~ 130 kg / 287 lbs).
• The recommended installation height for ergonomic operation is 650 mm / 26 in.
• The printer must be positioned out of direct sunlight when in use.
• Ensure there is enough clearance around the printer for operation and maintenance
purposes:
Front: 700 mm / 27.5 in Top: 150 mm / 6 in
3. Remove the 4. Remove the starter
locking clips at the kit and protective
side and remove foam pieces.
the outer box.
Back: 650 mm / 26 in
EN Original instructions