cecotec ENERGYSILENCE 600 MAX FLOW Manual De Instrucciones página 7

immediately. Do not touch the water!
- Check the power cable regularly for visible damage. If the
cable is damaged, it must be repaired by the official Cecotec
Technical Support Service to avoid any type of danger.
- Do not carry or pull the appliance from the power cable. Do
not use the power cable as handle. Do not push the cable
against corners or sharp edges. Do not crush the power
cable with the full weight of the appliance. Keep the cable
away from heat sources.
- Warning: do not use the appliance if its cord, plug, or housing
are damaged, nor after it malfunctions or has been dropped
or damaged in any way.
- Do not use the appliance in spaces with explosive or
toxic vapours.
- Keep the appliance away from strong heat sources.
- Keep hair, loose clothing, fingers, and other parts of the body
away from the openings and moving parts of the device.
- Never leave the device unattended during use. Unplug the
device after use and when you leave the room where it is
installed.
- Do not try to repair the appliance by yourself. Contact the
official Cecotec Technical Support Service for advice.
- Always turn off and unplug the device when not in use and
before assembling, disassembling, or moving it. To prevent
it from tipping over, wind the cord safely.
- Make sure the fan is not placed close to curtains or other
objects it may become entangled with.
- Do not place the cord beneath the carpet or cover it. Place the
appliance in a room with no obstacles and where it cannot
be tipped over. Position the cord in such a way as to avoid
obstructing passage and cause tripping hazards.
- Use the product in a well-ventilated area. Allow a free space
ENERGYSILENCE 600 MAX FLOW 7