Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
6. Place the door on a soft surface with the panel facing
upwards. Loosen screw 2 and part 1, install them on the left side
and tighten them securely.
7. Place the refrigerator on soft foam packing material or
similar material. Remove the adjustable bottom leg parts
and the bottom hinge part by unscrewing the self-tap-
ping screws from the specific flange.
8. Replace the lower hinge on the left side and secure it
with the special self-tapping screws.
Replace the adjustable lower leg pieces on the other side
and secure them.
9. Place the door in the correct position, adjust the lower
part of the hinge, make the hinge shaft fit into the lower
hole of the door.
10. Position the upper part of the hinge, insert the hinge
shaft into the upper hole of the door, adjust the position of
the door (hold the door by hand) and fix the upper part of
the hinge with the special self-tapping screws.
34
infiniton.es
Publicidad
