Kärcher G 2400 HH Manual Del Usuario página 9

Step 1
Remove detergent suction tube from
container and insert into 1 gallon of fresh
water.
Siphon water at low pressure for one
minute.
Step 2
Engine with fixed throttle:
Move the engine stop switch to the OFF
position.
Engine with manual throttle:
Move the throttle lever to the SLOW
position.
For more details see engine manual.
Step 3
Turn off the water supply.
Step 4
Press trigger to release water pressure.
Step 5
Disconnect the garden hose from the water
inlet on the unit.
Step 6
Disconnect the high pressure hose from the
high pressure outlet.
Step7
Engage the gun safety lock.
TAKING A BREAK
... FiVE MINUTES OR MORE
Step 1
Enqine with fixed throttle:
Move the engine stop switch to the OFF
position.
Enqine with manual throttle:
Move the throttle lever to the SLOW
position.
For more details see engine manual.
Step 2
Press trigger to release water pressure.
Step 3
Engage gun safety lock.
WiNTERiZiNG AND LONG=TERM
STORAGE
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the water which had remained in the
pump exits. Turn off immediately.
LI
3. Do not allow high pressure hose to
become kinked.
4. Store the machine and accessories in
a room which does not reach freezing
temperatures.
Caution: Failure to follow the above
directions will result in damage to the
pump assembly and accessories.
Only for USA:
K_rcher also recommends the regular
practice of using a pump protector like
'K_rcher Pump Protector' to help during
storage in the winter months.