GreenWorks Commercial UTV 800 Manual Del Usuario página 20

Headlight Switch
• Turn on the key switch and toggle the head light switch to the "ON" position. Turning the head light
switch to the "ON" position causes the following lamps to light simultaneously.
1. Tail lights (lamps at the rear portions of the vehicle)
2. Lamp built in the coolant temperature gauge
3. Lamp built in the speedometer
4. Front left and right position lights
• Toggle the head light switch to the "OFF" position to turn off the head light.
Emergency Light Switch
[if equipped]
Press the top half of the emergency light switch, the light flash along with the indicator on the instru-
ment panel. Press the bottom half of the emergency light switch to turn off the light.
NOTE: The emergency light switch will operate when the key switch is in the "ON" position. Be
careful that keeping the switch "ON" causes the battery to run out.
Turn Signal Light Switch
[if equipped]
To indicate a right turn, push on the lower half of the turn toggle switch.
To indicate a left turn, push on the upper half of the turn toggle switch.
When the left or right signal is activated, the indicated turning light will flash and the other will stay
on.
The indicator lamp at the instrument panel also flashes indicating the direction of the turn.
NOTE: The turn signal light switch is only operative when the key switch is in the "ON" position.
If the emergency light switch is pressed to the "ON" position while the turn signal is activated, the
indicated turning light will flash and other will stay on.
FEATURES AND CONTROLS
20