SAKAWA 1G100 Manual De Usuario página 124

Parts identification and assembly
1. See Figure 1:
(Actual model may vary from illustrations shown.)
To. Engine
B. Brush
C. Rod for Brush Angel Adjustment
D. Quick Release Handlebar Lock
And. Steering lever forward - backward
F. Throttle lever
G. Quick coupling lever
H. Clutch grip
I. Differential lever
J. Shifter rod
K. Shifter rod
L. High Fit Lock
* Brush/sweeper is not included!
2. Connect the ground wire to start the engine as shown in Figure 2.
Fill the engine with oil.
See the Oil Change section for more details.
Clothes
When using the machine, wear tight-fitting work clothes, sturdy work gloves, hearing protectors,
and non-slip steel-toed boots.
Security Zone
While the machine is running and the engine is running, do not leave the operating area behind
the handlebars. If it is necessary to leave the operating area, for example, to attach an accessory,
first stop the engine.
Warning: Stay out of the dashed zone while starting the engine!
124