Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Connect the negative terminal to the metal parts of the motor
2.
Plug in the charger (not included)
Handle height adjustment
Follow the height adjustment procedure as shown in Figure 9. Remember to lock the handle
again!
Tiller
The garden tiller is used to prepare the ground for planting. The garden tiller is equipped with a
depth skid, which guides the working depth. When the depth spur is up, the machine is working
at maximum depth. When the depth spur is down, work with a minimum depth.
The maximum working depth is approx. 20 cm.
If the ground is hard, it is advisable to use first gear. If the soil is sandy and soft, a second gear
can be used.
Cleaning the rudder
The machine should be cleaned after use. Use a garden hose to wash away dirt and dirt. Remove
grass, etc. from the rotor shaft. The chassis number should only be wiped clean with a damp
cloth to prevent unnecessary wear and tear. Avoid using a high-pressure cleaner during cleaning.
Sweeper
Sweeper brush height adjustment
Follow the height adjustment procedure as shown in Figure 10.
Correct storage of the sweeper
Store the sweeper so that the brushes do not touch the floor. This will extend the durability and
life of the brushes.
•Lower the support wheels about 50 mm so that the brushes float on the floor before the
sweeper disconnects from the base unit.
•Disconnect the sweeper from the base unit.
•Tilt the sweeper backwards so that it rests on the connecting portion, and let it rest in that
position during the storage period.
•Never let brushes rest on the floor longer. It will make them bend and useless. Figure 11.
Oil Change
The oil should initially be changed after the first 5 hours of use and thereafter once a year.
128
Publicidad
