Flex VCE 33 M AC Manual Original página 34

D
FLEX VCE 33 M AC / VCE 44 M AC / VCE 44 M AC Air / VCE 44 H AC
GB
An optional adapter plate
F
can be installed on top of machine for fastening of
2-point or 4-point storage cases.
NL
Remove the electrical plug from the socket before
installing the adapter plate.
I
N
Do not lift machine in adapter plate without
having storage case safely installed. Note the
weight and balance of the appliance in case of stor-
S
age. Maximum weight of storage cases is 30 kg.
DK
4.5 Recycling the machine
SF
Make the old machine unusable.
E
1. Unplug the machine.
2. Cut the power cord.
3. Do not discard of electrical appliances with
P
household waste.
As specified in European Directive 2012/19/EU
GR
on old electrical and electronic appliances,
used electrical goods must be collected sepa-
TR
rately and recycled ecologically.
SLO
5 Maintenance
HR
5.1 Regular servicing and inspection
SK
Regular servicing and inspection of your machine
CZ must be carried out by suitably qualified personnel in
accordance with relevant legislation and regulations.
In particular, electrical tests for earth continuity, in-
PL
sulation resistance, and condition of the flexible cord
should be checked frequently.
H
In the event of any defect, the machine MUST be
withdrawn from service, completely checked and
RO
repaired by an authorized service technician.
At least once a year, a Flex technician or an instruct-
BG
ed person must perform a technical inspection in-
cluding filters, air tightness and control mechanisms.
RUS
Appliances in Dust Class H must have their filtration
efficiency checked once a year. If the effiency of the
EST
filter does not fulfil the requirements for Dust Class,
the filter must be replaced.
LV
5.2 Maintenance
LT
Remove the plug from the socket before performing
maintenance. Before using the machine make sure
that the frequency and voltage shown on the rating
plate correspond with the mains voltage.
The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
18
with attachment system
*)
CAUTION
*)
clean with a dry cloth, and a small amount of spray
polish.
During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
• Use filtered compulsory ventilation
• Wear protective clothing
• Clean the maintenance area so that no harmful
substances get into the surroundings.
CAUTION
In the case of asbestos abatement wear ad-
ditional single-use clothing. Wear a P2 breath-
ing mask.
Before removing the machine from the area contami-
nated with harmful substances:
1. Clean the outside of the machine, wipe it clean
or pack the machine in well sealed packaging
and avoid spreading deposited harmful dust.
2. After use, in asbestos contaminated areas, the
machine must be cleaned by an authorised per-
son according to TGRS 519.
During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
• Packed in well sealed bags
• Disposed of in a manner that complies with valid
regulations for such waste removal.
For details of after sales service contact your dealer
or Flex service representative responsible for your
country. See reverse of this document.
*) Optional accessories / Option depending on model
Original instruction