Krups EVIDENCE ONE EA895 Manual Del Usuario página 24

MAINTAINING THE MILK SYSTEM
MAINTENANCE When?
After each milk drink, when
Milk rinsing
(10 s - 20 ml)
prompted by the machine.
Manual rinsing of the milk
After each milky drink.
tube (30 s)
For hygiene reasons, we
recommend that you clean the
whole milk system manually
Cleaning the milk system
every day for regular use or
when it has not been used for a
while (more than 2 days).
Important : For reasons of hygiene and in order to obtain identical froth each time, we recommend that you replace the
milk hose and its plastic nozzle approximately every three months. These accessories are available from the
KRUPS.fr website.
42
Accessories
Explanation
required:
Allows you to rinse the machine's
milk circuit. You can start a milk
system rinse at any time in the
"maintenance" menu
For hygiene reasons, cleaning is
required after each milky drink
made. This involves carefully and
manually cleaning the tube and
its connector with hot water after
Hot water + soap
each use.
See Chapter 5.B "QUICK RINSE
AFTER A MILKY DRINK" of the
quick start guide
This involves dismantling and
cleaning the removable "One
Touch Cappuccino" block
Hot water + soap +
regularly. See chapter 6 "DEEP
cleaning needle
MANUAL CLEANING OF THE
MILK SYSTEM - 5 MIN" of the
quick start guide.
OTHER MAINTENANCE TASKS
MAINTENANCE When?
We recommend that
you rinse the coffee Allows you to rinse the machine's
Coffee flushing system every day or coffee circuit. This process only
45 s - 30 ml when it has not been uses hot water. It ensures the
used for a while (more authentic taste of your coffee.
than 2 days).
To preserve the best coffee
flavour
reasons, we advise you to clean
Machine
When requested by the
Cleaning and degrease the machine.
machine.
13 min - 600 ml
It guarantees you optimal
preservation of the aromas of
your drinks.
Descaling
ensures its proper functioning
The appliance notifies
and eliminates any deposit
Descaling you when it is necessary
of
20 m - 600 ml to run a descaling
This step is very important to
program
ensure the proper operation and
durability of your appliance.
Important : You do not have to run the maintenance program as soon as the appliance requests it, but you must do it
reasonably soon after. If the cleaning is postponed the alert will remain displayed as long as the operation has
not been performed. If you unplug your machine during maintenance or in the event of electrical failure, the
cleaning program will resume from the start. It will not be possible to postpone this operation: it is mandatory
to rinse the water circuit. In this case a new cleaning tablet may be necessary.
Accessories required + actions
Explanation
required
O Place a container under the coffee
nozzles
O Press
O Select "maintenance" then
"coffee rinsing" Automatic rinsing
when switching on the device can
also be activated in "settings"
Accessory required: 1 KRUPS
cleaning tablet and a container
with at least 600 ml capacity.
and for hygiene
See chapter 10 "FULL AUTOMATIC
CLEANING OF THE MACHINE
3x / YEAR - 13 MIN" of the quick
start guide You can also carry out
cleaning when youwish by pressing
then "maintenance".
Accessory required: 1 KRUPS
descaling sachet and a container
with at least 600 ml capacity.
When it is necessary to run a
descaling program, the appliance
notifies you.
your machine
O When the descaling alert is reached
and is displayed, press
the program, to postpone it, press
limescale or tar tar.
.
Once the procedure has started,
follow the instructions that appear
on the screen. Descaling can also be
started via the "Maintenance" menu
-> "Descaling".
chapter 11 "DESCALING
See
PROGRAM - 20MIN 3x / YEAR" of the
quick start guide
to start
43