Krups EVIDENCE ONE EA895 Manual Del Usuario página 25

OTHER FUNCTIONS
HOW TO ACCESS YOUR MACHINE'S SETTINGS
Your KRUPS Intuition machine has many settings, do not hesitate to try them! This will allow you to personalise your experience
even more.
The Settings menu can be accessed via the button that allows access to the general menu (machine settings, maintenance
and product info).
SETTINGS
By selecting Settings, you can make the changes you want for optimum comfort of use, adapted to your preferences. The main
settings available are:
Date Setting the date is required, particularly if using an anti-limescale cartridge.
Clock You can either select a 12 or 24 hour clock display.
Language
You can select the language of your choice from the options provided.
Unit of
You can select the unit of measurement between ml and oz.
measurement
Screen brightness You can adjust the screen brightness according to your preference.
Coffee
You can adjust the temperature of your coffee drinks to three levels.
temperature
Tea temperature You can adjust the temperature of your tea to three levels.
Water hardness
You must set your water hardness between 0 and 4. See chapter "Measuring water hardness"
Auto on: You can automatically start preheating the appliance at a chosen time.
You can choose the length of time after which your selected appliance will automatically stop (period
Auto-off
of non-use).
Auto rinsing
You can choose to activate automatic rinsing of the coffee outlet or not when starting the machine.
You can restore the default settings. You can also permanently activate the Dark and Extra Shot
Drinks settings
function.
To exit the settings menu, press or the Settings button.
If you unplug the machine, the settings, apart from the date and the time, will be stored in the memory.
INFO
The "Info" menu provides access to a number of pieces of information about your use and about certain stages in the life of
your machine. It also informs you about its maintenance. The main information available is:
Drinks prepared
Displays the number of drinks made.
Coffee circuit
Indicates that it should be done in x number of cycles.
cleaning
Descaling Indicates that it should be done in x number of cycles.
Filter
Indicates that it will be changed in x days or x litres.
To exit the Info menu, press or the Settings button
44
ANSWERS TO YOUR QUESTIONS
OPERATION
1.The machine displays a fault, the software is frozen OR the machine is malfunctioning.
Turn off and unplug the machine, remove the filter cartridge, wait 1 minute and restart the machine.
Press and hold the ON/OFF button for at least 3 seconds to start.
2.The appliance does not turn on after pressing the ON/OFF button (for at least 3 seconds).
Check the fuses and the power socket of your electrical installation. Check that the two power plugs are correctly inserted
into the socket.
3.A power failure has occurred during a cycle.
The appliance resets automatically when it turns back on.
4.The grinder is running empty.
This is normal if it happens occasionally and if there are no coffee beans or only a small amount. It can run for up to 10
seconds off-load to know its consumption and ensure the correct operation of its function.
Coffee beans remain in the container:
– The coffee may be too oily and is therefore not being correctly captured by the appliance. You could try helping the
beans to go down and see if that gets it working again. However, it is advisable to change coffee (ref. type of beans
function).
– This is my usual coffee that has worked well until now: contact your KRUPS consumer service.
USE
1.The grinder makes an abnormal noise.
Foreign bodies are surely present in the grinder. Try to clean out with a vacuum cleaner, otherwise contact your KRUPS consumer
service.
2.There is water under the appliance.
Before removing the drip tray, wait 15 seconds after the flow of coffee so that the machine finishes its cycle correctly. Check
that the drip tray is well positioned on the machine. It must always be in place even when the machine is not in use. Verify
that the drip tray is not full.
3.The adjustment button for the grinding fineness is difficult to turn.
Turn the adjustment button of the grinding fineness only when the grinder is operating.
4.The appliance has not delivered any coffee.
An incident has been detected during its making.
The appliance is reset automatically and is ready for a new cycle.
5.You have used ground coffee instead of coffee beans.
Use your vacuum cleaner to collect the ground coffee contained in the bean container.
6.Water runs from the coffee nozzles when the machine stops.
This is normal. It is an automatic rinsing process to clean the coffee nozzles and ensure that they do not become blocked.
STEAM AND MILK
1.The milk flow of your machine appears to be partially or completely blocked.
Clean the "One Touch Cappuccino" block. See the quick start guide - "
DEEP MANUAL CLEANING OF THE MILK DISTRIBUTION SYSTEM - 5 MIN".
2.No steam comes out.
a. When using a steam cycle for the first time, if no steam comes out correctly:
Check that the steam output is not blocked. See above: "The steam output of your machine appears to be partially or
completely blocked".
Perform the following process once only:
Empty the water tank and temporarily remove the Claris Aqua Filter System cartridge. Fill the tank with mineral water high
in calcium (>100 mg/L) and make successive steam cycles (5 to 10 cycles) in a container until a continuous jet of steam is
obtained. Put the cartridge back in the tank.
b. The steam nozzle had already worked:
Check that the steam output is not blocked. See above: "The steam output of your machine appears to be partially or
completely blocked". If after completing the above steps it still does not work, please contact your service centre.
3.Steam escapes from the grid of the drip tray.
Depending on the type of preparation, steam may escape from the grid of the drip tray.
4.Steam appears under the bean tray lid.
Check that the cleaning tablet hatch located under the lid (L) is properly closed.
45