Publicidad
Idiomas disponibles
Idiomas disponibles
LBP 125-15 18-EC
Symbols used in this manual
WARNING!
Denotes impending danger. Non-observance
of this warning may result in death or extremely
severe injuries.
CAU TION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
N OTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power tool,
read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 19)
For your safety
WARNING!
Before using the power tool, please read the
follow:
these operating instructions,
the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property may be
damaged. The angle grinder may be operated
only if it is
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
This angle grinder is intended
– for commercial use in industry and trade,
– for dry grinding metal and stone;
– for use with grinding tool and accessories
recommended in these instructions or by
the manufacturer.
– cutting function only permitted with a
suitable cutting guard
Not permissible are e.g. chainsaw discs, saw
blades.
Safety instructions for angle
grinder
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future
reference.
Safety Warnings Common for Grinding
Operations
■ This power tool is intended to function as
a grinder tool. Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may
result in electric shock, fire and/or serious
injury.
■ Operation such as polishing, sanding and
abrasive cutting-off are not recommended
to be performed with this power tool.
Operations for which the power tool was
not designed may create a hazard and
cause personal injury.
■ Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer. Just because the
accessory can be attached to your power
tool, it does not assure safe operation.
■ The rated speed of the accessory must
be at least equal to the maximum speed
marked on the power tool. Accessories
running faster than their rated speed can
break and fly apart.
■ The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded
or controlled.
13
Publicidad
