Publicidad
Idiomas disponibles
Idiomas disponibles
SURROUND
Enjoying Movie and Music sources in surround mode
4
6
2
1
*1. When selecting PHANTOM
in the center mode, no test
tone is output from the center
speaker.
*2. When 3 STEREO is selected
in the center mode, no test
tone from the surround speaker
is output.
18
En
1.
Select Dolby Pro
Logic.
2.
Select the center
mode.
Before operating,
press the SUR-
ROUND button.
Refer to page 31 for the
5
characteristics of the
center modes.
3.
Adjust to the desired
volume.
3
4.
Set the test tone.
5.
While center or rear
sound is coming out,
adjust the center level
and rear level so that
the test tone volume
output from each
speaker is the same.
The BALANCE L, R
buttons of this unit can
be used to adjust the
FRONT balance.
6.
Tune OFF the test
tone.
7.
Play the desired source.
¶ The TEST TONE signal will be output in the PRO LOGIC mode.
¶ The TEST TONE signal will not be output in the SFC mode, but the only rear level
can be adjusted.
Publicidad
