Publicidad
Idiomas disponibles
Idiomas disponibles
1. BEFORE USE
VOLTAGE SELECTOR SWITCH
Mains voltag in Saudi Arabia are 127V and 220V only.
Never use this model with the 110V setting in Saudi
Arabia.
This line voltage selector switch is on the rear panel. Check
that it is set properly before plugging the power cord into
the household wall socket. If the voltage is not properly set
or if you move to an area where the voltage requirements
differ, adjust the selector switch as follows.
1. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the arrow points to
the voltage value of your area.
120-127V
110V
240V
VOLTAGE SELECTORS
6
En
220V
Medium-size screwdriver
CHANNEL STEP SETTING
The unit has been factory preset to the channel allocation
value for the area in which it is to be sold. If this value is set
incorrectly, the tunes in frequency may be wrong, or sound
may be distorted, resulting in an inability to reproduce
reception signals at their proper sound quality. For this
reason, be sure to confirm that the values are set correctly
before first using the unit.
FM 100kHz, AM 10kHz:
Set to this position for areas with an FM reception step of
100kHz and AM 10kHz.
FM 50kHz, AM 9kHz:
Set to this position, for areas with an FM reception step of
50kHz and AM 9kHz.
NOTE:
When unsure about the channel allocation for your area,
consult your dealer for correct information.
To Change Channel Steps
With the power turned on, function is set TV. (Any mode is
available) Hold the MEMORY and TUNING (-) button
pressed while pressing the SFC button to change the dis-
play is AMERICA or GENERAL by every time pushing.
AMERICA is FM 100kHz / AM 10kHz and GENERAL is FM
50kHz / AM 9kHz. The display is returned to the TV after 5
seconds.
MEMORY
TUNING -
SFC MODE
6
Publicidad
