Control Panel; Turning The Unit On - dirna Bergstrom bycool green line integral power Manual Del Usuario

INTEGRAL POWER

Control Panel

4
4
1.- On/off: unit on - off and mode selection F4 / F0 / F1 / F6
2.- Temperature selector (15/27ºC - 59/80ºF), Remote control programming,
Fahrenheit and airspeed: Atmospheric temperature and blower speed control
(between 1st and 5th speed) in manual mode only.
3.- Display: Screen indicating the selected function and the status of the unit.
4.- LED: On - indicates unit running F4, F0.
• When connecting, the unit checks the LEDs, displays 88 ;--; and goes off.
Special display messages (please check Failure Diagnosis):
" Technical Control" Low battery (the unit will beep for a few moments and the unit
:
will turn off).
Poor contact of the recirculation sensor cables or recirculation sensor faulty.
EO:
Poor contact of anti-freeze sensor cables or anti-freeze sensor faulty.
E6:

Turning the unit on

Press the On/Off key
in Function F4 (Automatic Function)
Keep the On/Off key
be displayed; release the key for the required function.
ºC
ºF
3
TEMP
to turn on the Integral Power unit. The unit always starts up
pressed down to change function. The different functions will
9
Air conditioning for vehicles
2
EN
ON/OFF
1