geberit EFP 203 Manual De Operación página 26

EN
Pressing with Geberit
pressing attachments
WARNING
Risk of injury caused by flying
fragments
▶ Wear protective goggles and
WARNING
Risk of injury caused by the
use of incorrect pressing
attachments
▶ Only use pressing
WARNING
Risk of fire from heat build-up
▶ Allow the pressing tool to
▶ Do not place or store the hot
The pressing procedure can be
cancelled at any time. → See
Cancelling the pressing procedure.
To improve ease of use, the pressing
head of the pressing tool can be
turned to any position up to 180°
before pressing. The pressing head
can only be rotated before the
pressing procedure.
26
a protective helmet.
attachments that correspond
to the diameter of the
pressfittings to be
processed.
cool down for at least
30 minutes after 30 minutes
of continuous operation.
pressing tool near easily
flammable materials.
Prerequisite
– Pipe ends are deburred and clean.
– The pipe section and pressfitting are
fitted together according to the
installation manual of the piping
system.
– The pressing attachment is inserted
correctly.
1
Connect the pressing tool to the
power supply system.
✓ The tool is ready for operation.
2
Fit the pressing attachment to the
pressfitting correctly and do not tilt.
→ See user manual for the Geberit
pressing attachments in question.
54043197424101003 © 12-2023
968.393.00.0(02)