RAV KTE100 Instrucciones De Uso página 170

2.5 Technical data
Technical data
Nominal load
Effective lifting height
Own weight
Maximum length
Maximum width
Height
required Compressed air
Tabletop dimensions
Lifting time under load
Lowering time under load
Operating pressure
Hydraulic oil
Oil capacity
Hydraulic cylinder
2.6 Site requirements
Dry, clean workshop interior area -10 to + 40°. Fixed, level floor, the static load must be observed.
2.7 Equipment and accessories
It is recommended that only original Blitz special tools are used on the lifting table. These can be re-
quested from Ravaglioli S.p.A..
3 Security
3.1 General occupational safety
see Point 1.1
3.2 Basic information and protective measures
The area of danger is within the outer dimensions of the loaded table.
3.3 Intended use
The product is used exclusively for lifting and lowering loads, for transporting loads in the lowered
position, and serves as a work table.



131017
The product may only be used within the scope of its technical data (→2.5).
Intended use also includes compliance with all information in these operating instructions.
Any use that goes beyond the intended use or is different is considered misuse.
1000 kg
1300 mm
230 kg
1650 mm
740 mm
535 mm / 1835 mm
min. 8 bar (max. 10 bar)
1260 mm x 740 mm
approx. 1 min 40 sec.
approx. 4 seconds.
260 bar at 1000 kg load
HLP 22
1.8 l
2x Ø55 / 450mm
KTE100
Security
174