KTE100
Test Book
Regular audit
To be caried out by technical experts only:
Tick the appropriate.
Test steps
Condition of name plate
Warning signs/stickers
Load capacity sticker
General condition of the lift table
Condition of paintwork
Condition of welds
Visually inspect load-bearing parts for cracks
Condition/function of maintenance supports
Tightening torque of the fastening screws
Condition/function of rollers
Condition/function of parking brakes
Condition/function of handle
Foot pedal status/function
Condition/function Bolts of the scissors
Hydraulic pump condition
Hydraulic oil level dipstick
Condition of hydraulic hose / screw connection
Tightness hydraulics
Condition/function of lifting cylinder
Condition/function sliders/rollers
Function test with load
Security check performed
Date: .....................................................
Company: ......................................................
Expert (name, address)
..................................................................
...................................................................
Signature of operator
Defects eliminated on................................
...................................................................
Operator's signature
131017
Type designation .....................................
Serial number: ...........................................
In good
working or-
der
Result
Continued operation is questionable, verification required
Continued operation is possible, eliminate defects
Continued operation is safe, lifting system without defects
...................................................................
Signature of technical expert
Use a separate form for a reaudit!
...................................................................
Technical operator's signature
Has de-
To
fects
reaudit
Remark
202