RAV KTE100 Instrucciones De Uso página 175

KTE100
Operation
5.2 Installation
The hydraulic pump is filled with oil upon delivery. Here you do not need to fill or top up any oil before
commissioning. The oil level can be read on the oil dipstick (→Illustration 5-6).
Replace the screw with the oil dipstick
Illustration 5-5
6 Operation
When using load handling equipment, lifting platforms or auxiliary equipment, the operating instructions
for these products also apply.
The lift table is equipped with rigid castors and a pair of swivel castors with parking brakes.
179
Danger
Danger of death and injury
Due to crushing, shearing or by falling loads
Do not keep anyone in the endangered area.

Observe the lifting / lowering process.

Ensure non-slip and safe acceptance of the load using load handling

equipment or non-slip mats.
Centre of gravity of the load as centrally as possible on the lifting table.

No one-sided overhanging load.

No loose objects on the tabletop.

CAUTION
Risk of injury
due to crushing, squeezing or by impact
Set up the lift table in such a way that crushing and shear points between

the environment and the lift table are avoided.
Before each lowering of the lifting table, check the shear points and the lift-

ing table for possible blocking of the lowering movement.
Illustration 5-6
131017