RAV KTE100 Instrucciones De Uso página 178

7 Inspection, testing and maintenance
7.1 Placing the lifting table on maintenance supports
Illustration 7-1
7.2 Inserting the maintenance supports in case of defective hydraulics




7.3 Folding in maintenance supports


131017
Danger
Danger to life and damage to property
due to falling objects, gravity, structural safety
Maintenance / inspection only by trained personnel / specialists.

Maintenance and repair work only on the unloaded table.

Maintenance only with installed maintenance supports.

Block access to the workspace for unauthorized persons.

Lift the table top with a forklift/crane and suitable lifting equipment.
Set maintenance supports [11] vertically as described (→7.1).
Lowering the hoist with a forklift / crane.
Check whether maintenance supports are correctly positioned.
WARNING
Risk of injury and damage to property
by lowering the tabletop due to an emerging vacuum in the hydraulic cylin-
der
Only fold in the maintenance supports after the lifting table has been re-

moved from the supports by its own hydraulic drive.
Never use force to knock out the maintenance supports.

Do not stop in the danger area of the hoist/scissors.

Lift the unloaded lifting table with foot pedal [7].
Fold in maintenance supports [11].
Inspection, testing and maintenance
1. Lift the unloaded lifting table with foot pedal [7].
2. Fold the maintenance supports [11] in the direction
of the arrow / set them vertically.
3. Operate the lowering valve [12] and slowly lower
the lift table.
4. Check whether maintenance supports are correctly
positioned.
KTE100
182