Health O Meter Professional 349KLX Manual Del Usuario página 125

Back to Home Page
MAINTENANCE
Maintenance
The following pages provide instructions for maintenance, cleaning, calibration, and
troubleshooting for the 349KLX scale. Maintenance operations other than those described in
this manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the scale for obvious damage, wear, and tear.
2. Inspect the AC adapter for cord cracking or fraying, or for broken/bent prongs.
Note:
This scale is an extremely sensitive weighing device. If the auto-off function is disabled,
battery power will be consumed at a rapid rate.
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Caution: Disconnect the scale from the AC power source prior to cleaning the unit.
1. Clean all external surfaces with a clean damp cloth. Mild antimicrobial or antibacterial soap
and water solution may be used. Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solutions.
3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.
4. Do not use abrasive cleaners.
UM349KLX REV20171212
125