Health O Meter Professional 349KLX Manual Del Usuario página 7

DISPLAY ASSEMBLY TABLE TOP USE INSTRUCTIONS
Assembling the Scale
1. Carefully remove the scale
platform and display
assembly from the carton,
and place on a flat, level, and
dry surface.
2. If using the display assembly
on a desk or table, insert the
metal stand into the slots on
the back of the display.
3. Connect the cable to the RJ
Jack in the bottom of the
display assembly. Ensure that
the cable rests on top of the
metal stand so the display
assembly rests flat on the
table. If using the scale on
battery power the scale is
now ready for use. If using
the scale with the optional AC
adapter see page 10 for set
up instructions.
UM349KLX REV20230913
Cable
7
Back to Home Page
RJ jack
Cable resting on
top of display
stand.