Publicidad
Idiomas disponibles
Idiomas disponibles
to press the
key "A" to light up the indicator, and then press the key "A" again to adjust the gear
Open door alarm
There is no door opening prompt tone; there is an open door alarm tone: when the refrigerator
door is not closed for two minutes after it is opened, the buzzer will sound until the door is
closed.Press the B button to cancel the buzzer alarm,it is recommended to close the door in time.
Fridge/freezer button
Press the
corresponding temperature icons light.
Standby Function
Long press the standby button
Adjusting the temperature
The temperature setting is changed by pressing (
temperature setting after 15 seconds.
Setting
Setting
Fast cooling mode
Selection: when in fridge mode, press the (
In Fast freezing mode, the appliance will use the temperatures set at 2°C in fridge mode and will
automatically exit this mode after 150 minutes of operation or if a temperature or mode setting is
changed.
Fast freezing mode
Selection: when in freezer mode, press the (
In Fast freezing mode, the appliance will use the temperatures set at -24°C in freezer mode
and will automatically exit this mode after 24 hours of operation or if a temperature or mode
setting is changed.
Failures
Should a failure occur, the corresponding icons will blink together: the error codes and types are
as follows:
Fridge:
Error
Description of the error
code
button for 3 seconds to switch between fridge/freezer. Once pressed, the
Setting
for 10 seconds to set the standby function.
). Then the appliance will use the new
Setting
Setting
) button until the
) button until the
Display
Setting
icon lights.
icon lights.
Publicidad
