Preparing Hot Water; Steam For Heating Drinks - Gaggenau CM 210 Manual De Instrucciones

Preparing hot water

Steam for heating drinks

Push down the sleeve a on nozzle.
Place an appropriate cup under the nozzle.
Rotate function selector to 0 and fill the cup.
m
Avoid the risk of scalding!
When the function selector is set to 0, the nozzle may
spurt slightly. Escaping water is very hot.
Do not touch nozzle 12 or direct at people!
End the process by rotating the function selector
back to ) position.
Push up the sleeve a on nozzle.
Immerse nozzle deep into the liquid which is to be
heated.
Slowly rotate function selector to =.
The appliance now heats up for approx.
20 seconds. Then the liquid is heated.
m
Avoid the risk of scalding!
When the function selector is set to =, the nozzle
may spurt slightly. Escaping steam is very hot.
Do not touch nozzle 12 or direct at people!
End the process by rotating the function selector
back to ) position.
Note: When nozzle has cooled down, clean immediately.
Dried residue is difficult to remove.
WARNING
WARNING
m
m
17