Draining Hot Water - Gaggenau CM 210 Manual De Instrucciones

Turn on
water
unit de-
scaling
Turn on
coffee
unit de-
scaling
empty clean
trays contacts
Unit is
rinsing
coffee

Draining hot water

system
too hot
32
Set function selector to 0 position.
Note: The appliance is automatically rinsed. Water flows
at intervals into the receptacle. Wait for the next message
on display (approx. 4 minutes).
Set function selector to ) position.
Note: The appliance is automatically rinsed. Water flows
at intervals into the tray 23. Wait for the next message on
display (approx. 4 minutes).
Empty tray 23 and coffee dreg tray 21.
Clean and dry contacts 25.
Re-insert tray 23 and coffee dreg tray 21.
Wipe splashes off the nozzle and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated ring
on m descaling goes out. The appliance is ready for
use again.
The descaling program requires a specific water
temperature before it can start. If the water temperature
is too high, drain hot water first!
Place a receptacle under the nozzle.
Set function selector to 0 position.
Water runs into the receptacle.
Set function selector to ) position.
The required temperature has been reached.
The descaling process can start.