Gaggenau CM 210 Manual De Instrucciones página 22

22
TURN 0n COFFEE is displayed, turn function
selector 2 back to ) position.
The water hardness can still be indicated in the
display program, however the setting is not
activated.
Removing the filter
The appliance must be switched on.
Unscrew the filter 20 with the provided tool in an
counter-clockwise direction.
Hold down button q on display for at least
2 seconds.
Select FILTER YES/nO with r or s.
Press button q, display flashes.
Select FILTER N0/0Ld with r or s.
Press button q to save the setting.
Press the o button. Back to standby.
Important
– Replace the filter after approx. two months or after
approx. 400 brews.
– Do not insert the filter if the UNIT CaLCIF
message lights up. First descale the appliance.
– Before descaling the appliance, take the filter out of
the water tank.
– When the filter has been inserted, it must be rinsed.
Follow the displayed instructions.
– If the appliance is always operated with an inserted
filter, it should be descaled once or twice a year,
even if the descale message is not displayed.
– If softened water from a domestic descaling unit is
used, a filter should not be inserted.
Re-order the filter quoting order no. 461732.