SSS Siedle BCM 753-0 Informacion De Producto página 5

English
Application
Bus camera 130/180 for Siedle Vario
with automatic day/night switchover
(True Day/Night) and integrated
infrared lighting.
Quick cabling thanks to plug­in con­
nection.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
1 In the case of video systems, the
following mounting situation must
be avoided at all costs:
• direct backlight
• direct sunlight
• very bright image backgrounds
• highly reflective walls opposite the
camera
• lamps or direct light sources
Scope of supply
• Bus camera for Siedle Vario
BCM 753­0 / BCM 758­0
• Connecting cable 300 mm long
• This product information
Mounting
2 Recommended mounting height
appr. 1.60 m to centre camera.
3 Note the mounting position of the
camera, the type designation must
be legible at the top back of the
module.
4 Pick-up angle of the camera with
an angle of aperture of appr. 130°.
5 Pick-up angle of the camera with
an angle of aperture of appr. 175° in
the full screen mode.
6 With an angle of aperture of
appr. 175°, the pick-up angle of
the camera can be adjusted to any
mounting situation. Open the flap
on the back of the module with the
aid of a screwdriver.
7 Set the required picture excerpt
from the camera view (1 to 9) or full
screen (0) using the rotary switch.
Once the required picture excerpt
has been set, close the flap and
mount the module.
8 Select the picture excerpt based
on the existing mounting situation.
The camera's pick-up angle is thus
reduced.
a Picture excerpt (1–3)
top camera alignment
b Picture excerpt (4–6)
central camera alignment
c Picture excerpt (7–9)
bottom camera alignment
Pilfer safeguard
In order to protect the Vario modules
from unauthorized access, the pilfer
safeguard controller DSC 602-... can
be optionally used in conjunction
with the ZDS 601-... This can be
used to protect the inserted modules
from unauthorized access.
Installation
Installation and commissioning are
described in the system manual.
The latest issue can be found in the
download area at www.siedle.com.
Accessories
• ZVK/BCM 750/500
Connecting cable 500 mm long,
between BCM 753/758-... and
BTLM 750-...
• ZAK/BCM 750
Camera connecting cable with ter­
minal block for BCM 753/758-...,
enables the camera to be connected
to the BTLM 65x-... bus door loud­
speaker module.
Specifications BCM 753-0
Horizontal/vertical pick-up angle:
approx. 130°/100°
day/night switchover (true day/
night): Automatic
Infrared lighting: Integrated
Wide Dynamic Range (WDR)
Colour system: PAL
Image pick­up: CMOS sensor 1/3"
728 x 488 pixels
Resolution: 550 TV lines
Lens: 2.1 mm
2­step heating: 12 V AC
max. 130 mA
Protection system: IP 54, IK 10
Ambient temperature:
–20 °C to +55 °C
Height of structure (mm): 15
Dimensions (mm) W x H x D:
99 x 99 x 41
Specifications
BCM 753-0 NTSC
Colour system: NTSC
For further technical details, see
above
Specifications BCM 758-0
Horizontal/vertical pick­up angle:
approx. 175°/120°
day/night switchover (true day/
night): Automatic
Infrared lighting: Integrated
Full screen or 9 picture excerpts can
be selected
Electronic image rectification in full
screen
Extended pick­up angle in edge area
for selected picture excerpt
Backlight compensation (BLC)
Wide Dynamic Range (WDR)
Colour system: PAL
Image pick-up: CMOS sensor 1/2.7"
1920 x 1080 pixels
Resolution: 600 TV lines
Lens: 1.55 mm
2­step heating: 12 V AC
max. 130 mA
Protection system: IP 54, IK 10
Ambient temperature:
–20 °C to +55 °C
Height of structure (mm): 15
Dimensions (mm) W x H x D:
99 x 99 x 41
5