DeWalt D25032 Traducido De Las Instrucciones Originales página 20

EngLIsh
ROTARY HAMMER DRILL
D25032, D25033, D25133, D25134, D25143, D25144
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
most reliable partners for professional power tool users.
Technical Data
Voltage
(UK & Ireland only)
Type
Frequency
Power input
No-load speed
No-load beats per min
Single impact energy (EPTA 05/2009)
Maximum drilling range in
steel/wood/concrete
Chisel positions
Core drilling capacity in soft brick
Tool holder
Collar diameter
Weight
Noise values and vibration values (triax vector sum) according to EN IEC 62841-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
WA
Drilling into concrete
Vibration emission value a
h,HD
Uncertainty K =
Chiselling
Vibration emission value a
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
20
V
Hz
W
min
bpm
J
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
m/s
=
m/s
m/s
=
m/s
D25032 D25033
230 230
230/115 230/115
1/10 1/10
50 50
710 710
–1 0–1550 0–1550
0–5680 0–5680
2.0 2.0
13/30/22 13/30/22
— 44
50 50
SDS plus® SDS plus®
43 43
2.5 2.5
91 91
99 99
3 3
2 14.9 14.9
2 1.5 1.5
2 — 15.3
2 — 1.5
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
WALT one of the
e
D25133 D25134 D25143
230 230
230/115 230/115 230/115
1/10 1/10
50 50
800 800
0–1500 0–1500 0–1450
0–5500 0–5540 0–5350
2.6 2.8
13/30/26 13/30/26 13/30/28
44 48
50 65
SDS plus® SDS plus® SDS plus®
43 54
2.6 3.0
92 93
100 101
3 3
16 18.1
1.5 1.5
15.4 17.4
1.5 1.5
D25144
230 230
230/115
1 1/10
50 50
900 900
0–1450
0–5350
3.0 3.0
13/30/28
48 48
65 65
SDS plus®
54 54
3.1 3.1
92 92
100 100
3 3
17.3 17.3
1.5 1.5
16.5 16.5
1.5 1.5