B
Product usage
1.
Get the machine laid on the floor, using some soft material like foam or clothes between
the machine and floor for a protection;
2.
Stick the longer sponges to the longer bottom edges of machine, and the shorter sponges
to the shorter bottom edges, Installation of panel is same as sponges.
Operation
Quick Start
Caution!
•
Before washing, please make sure the washing machine is installed properly.
•
Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it's recommended to
clean your appliance before first use. For this reason, recommended to clean
the inner drum by running the «Drum Clean» or other program with the
optional temperature of 90°C. Be careful not to put laundry and detergent
in the machine.
•
Before Washing
earth
terminal
1.
Plug in
2.
Open tap
3.
Load
4.
Close door
5.
Add detergent
2x
2x
9
EN