Saturation Display; Audible Signal - Gaggenau AF2 Serie Instrucciones De Uso Y Montaje

Saturation display

When the metal grease filters are saturated, a signal
sounds for approx. 4 seconds after the fan is switched
œ
off. The saturation indicator also lights up.
▯
If you have not yet done so, the metal grease filters
should be cleaned now. For instructions on how to
clean the metal grease filters, please refer to the
section
Cleaning and maintenance
▯
While the saturation indicator is lit up, it can be
reset. To do this, press the
Lighting
The lighting can be switched on and off independently
of the ventilation.
@
Press the button.
Setting the brightness
@
Press and hold the button until the desired
brightness is reached.

Audible signal

Switching on the acoustic signal
When the fan is switched off, press the
same time for approx. 3 seconds. A signal sounds as an
acknowledgement.
Switching off the acoustic signal
Repeat the "Switching on the acoustic signal" process.
.
œ
button.
# Ž
and at the
23