Publicidad
Idiomas disponibles
Idiomas disponibles
Ambient temperature
E7
sensor failure
Sticking problem with
E10
button
Freezer:
Error Code
Error Description
Freezer temperature
E1
sensor failure
Freezer defrost sensor
E5
failure
E6
Communication error
Ambient temperature
E7
sensor failure
Sticking problem with
E10
button
When the appliance is in normal operation and no fault exists, the screen displays the
set temperature of the refrigerator chamber.
5.4. FRIDGE/FREEZER MODE SWITCH
This appliance can operate in either fridge or freezer mode. Press the temperature
setting button (A) for 3 seconds to switch between Fridge / Freezer mode, the
corresponding temperature icons will shine.
5.5. RECOMMENDED TEMPERATURE SETTINGS
•
Refrigerator compartment: 4 °C
•
Freezer compartment: -18 °C
5.6. TEMPERATURE SETTING
To change the temperature setting, press the temperature setting button (A). Each
press will change the setting once.
The temperature setting sequence is:
Once the temperature setting has been completed, the refrigerator will run according to
the set value after 15 seconds.
5.7. QUICK COOLING MODE
To enter quick cooling mode: under refrigerator mode, press the temperature setting
button (A) until the icon " " lights up.
During quick cooling mode, the refrigerator runs at 2°C (preset temperature), and it will
exit this mode automatically after running for 150 minutes, or after temperature setting
or mode switch.
Icon " " & icon "4" shine at same time
Icon "2" & icon "3" shine at same time
Display
Icon " " & icon "-24" shine at same time
Icon " " & icon "-22" shine at same time
Icon "-24" & icon "-20" shine at same
time
Icon " " & icon "-20" shine at same time
Icon "-24" & icon "-22" shine at same
time
17
EN
Publicidad
